MAINLAND VALVE & FITTING, INC.
INDUSTRIAL WHOLESALE SUPPLY
MAINLAND VALVE & FITTING IS A SURPLUS INDUSTRIAL WHOLESALE SUPPLY COMPANY. MOST MATERIAL OFFERED BY US WILL BE OF AN INDUSTRIAL GRADE. WHAT THAT MEANS FOR YOU IS, YOU WILL RECEIVE A HIGH QUALITY LONG LASTING PRODUCT AT A SUBSTANTIAL SAVINGS.
Be sure to add me to your
favorites list
!
Lot Description:
Description:
Size: 1/2″
(Please refer to picture chart and make sure you are ordering the correct size)
Half Coupling; Standard, Schedule 40
Connection: Female Threaded (NPT)
Alloy: Aluminum 6061-T6
Bung, Spud, Weld-On, Bung
MADE IN THE USA
Specifications
Material
6061-T6
Size
1/2
in
Threads/Inch
14
Drill
23/32″
(0.719″)
Outer Diameter (O.D.)
1.06
in
Length
0.63 in
​Product use:
Aluminum Pipe Fittings
are a
product that is widely used for all types of fabrication projects where lightweight and corrosion resistance is a primary concern.
Aluminum pipe fittings can be used in various applications due to their unbeatable strength to weight ratio compared to other metals. Weighing in at 1/3 as much as Iron, steel, copper or brass
Aluminum is the most abundant metal element in Earth’s crust and makes up about 8% by weight.
Aluminum pipe fittings have very good corrosion resistance and and are virtually maintenance free.
It has good heat conductivity, better than any other common metal and conducts electricity comparable to copper products.
Aluminum is also non-toxic and can be used in food preparation equipment.
Aluminum’s reflective nature is suitable for light fixtures, is non-combustible and so does not burn.
Some end uses include transportation, food packaging, furniture, electrical applications, building, construction, machinery and equipment.
Technical Data:
Lead-Free Aluminum
National pipe threads in accordance with ANSI/ASME B1.20.1
Fittings are right-hand threaded
The fittings have a general conformance with dimensional standard MIL-DTL-52618-E
Fittings are random tested at 120 pounds of air pressure under water, for a normal surface condition rating of 150 pounds of pressure
Individual fittings are not marked with alloy or pressure data
Fittings are not anodized
Factory New, USA Manufacturer
Applications: Fittings meet applicable chemical physical properties
Dimensions and Weights May Vary
The fittings have a general conformance with dimensional standard MIL-DTL-52618-E; the flanges and flanged fittings with dimensional standard ANSI B16.1. Fittings are random tested at 120 pounds of air pressure under water, for a normal surface condition rating of 150 pounds of pressure. Extra-heavy couplings cannot be tested or certified for pressure rating. Individual fittings are not marked with alloy or pressure data. Fittings are not anodized.
TYPICAL ANALYSIS
.
ALLOY
6061-T6
Magnesium
0.80-1.20%
Silicon
0.40-0.80%
Copper
0.15-0.40%
Manganese
0.15%
Iron
0.70%
Zinc
0.25%
Titanium
0.15%
Chromium
0.15-0.35%
Aluminum
Balance
PROPERTIES
.
ALLOY
6061-T6
Tensile Strength
35,000 PSI (Extruded)
42,000 PSI (Drawn)
Yield Strength
26,000 PSI (Extruded)
35,000 PSI (Drawn)
Elongation
10% (Extruded)
10-14% (Drawn)
Weight
0.098 lbs. per cu.
in.
Specific Gravity
2.70
Electrical
Conductivity
(% of IACS)
40
Thermal conductivity
(25° CGS)
.41
Melting Range
1080-1200° F
(
These products are represented as FACTORY NEW)
IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT US.
Be sure to add me to your
favorites list
!
Bid High
&
Bid
Often
THANK YOU, COME AGAIN
Please note:
In some cases we will use the same picture for multiple listings of the exact same item. Please keep in mind that you will receive the same product of the same or better quality as pictured. Our office hours are M-F, 8-5 cst. We will respond to any questions you have on the following business day.
INVESTMENT RECOVERY
*SURPLUS INDUSTRIAL WHOLESALE SUPPLY*
Terms & Conditions:
Mainland Valve & Fitting, Inc. is a wholesaler of surplus industrial equipment. All products represented by Mainland Valve & Fitting, Inc. that is noted as surplus are surplus and are not represented by any manufacture. No manufacture warranty or any warranty is expressed or implied.  All products represented by Mainland Valve & Fitting, Inc. that is noted as factory new are factory new and are warranted only by the manufactures warranty. No other warranty is expressed or implied.  All Names, Logos, Description & other related information are trademarks of their respected companies.
All information listed herein is, to the best of our knowledge, believed to be correct. All material is surplus, and we have no way of testing anything we sell. Please review the pictures carefully. All material noted as
new surplus
are unused and in as new condition, all material noted as
used
are used and in a usable or repairable condition. If you have any questions, contact us.
Shipping cost will be actual cost only plus a small handling fee to help cover cost associated with shipping ($2.00 min. unless special request are made). We will combine multiple auctions into one shipment; you pay only one handling fee per shipment, even on combined shipments. Questions, comments, or concerns please contact us.
Please check out our about me page which includes our full terms and conditions and full warranty information.